1. Start with the AutoFry in the ready position.
2. Take your basket out of the machine.
3. Set the basket on a firm surface.
4. Place the crescent wrench on the flat side of the basket rod
5. While holding the basket firmly with one hand, apply pressure to the wrench to put a slight twist in the rod. A little twist will go a long way, so start small, test your work and twist more if you have to.
7. If your basket is at the right height (remember, it's 2.5-3 inches from the base to the top corner of the basket), congratulations you've successfully adjusted your AutoFry basket height.
8. If your basket is not at the right height, repeat steps 2-6 until you've achieved the proper AutoFry basket height. This may require a little bit of trial and error.
That's it. Six simple steps to adjusting your basket height and returning your AutoFry back into a frying master machine. Remember, if you have trouble, our technical support is open from 8am-8pm EST every day to provide assistance by calling 800-348-2976 x112